NSN 5306-01-513-5966
Coaxial Connector
Between 4.563 inches and 4.593 inches fastener length, between 0.188 inches and 0.203 inches head height, between 0.554 inches and 0.564 inches width between flats, grip diameter: between 0.369 inches and 0.870 inches .
Manufacturer part number NAS6606H64 for national stock number 5306015135966.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-513-5966.
-
MPN or Model
NAS6606H64
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.563 inches and 0.593 inches -
Fastener Length
Between 4.563 inches and 4.593 inches -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Grip Diameter
Between 0.369 inches and 0.870 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 4.568 inches and 4.588 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3971 MPN NAS1063D2-2Terminal Board Marker Strip
- 5305-00-007-9893 MPN NAS1102C04-13Machine Screw
- 5305-00-021-3806 MPN MS35307-413Hexagon Head Cap Screw
- 5305-00-027-5665 MPN NAS608-440-6Socket Head Cap Screw
- 5305-00-052-5926 MPN MS35198-74Machine Screw
- 5305-00-054-2264 MPN MS24678-57CSocket Head Cap Screw
- 5305-00-068-0542 MPN NASM24678-7CSocket Head Cap Screw
- 5305-00-071-2230 MPN MS90725-21Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-513-5966 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6606H64 | National Aerospace Standards |