NSN 5306-01-513-9187
Wheel Bolt
Dash mark on head to denote corrosion resistant steel bolts.
Manufacturer part number AN3C62A for national stock number 5306015139187.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-513-9187.
-
MPN or Model
AN3C62A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.407 inches and 0.421 inches -
Fastener Length
Between 6.266 inches and 6.312 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
End Application
15 ton vapor -
Thread Diameter
0.190 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-262-9977 MPN AN3108A18-30SElectrical Plug Connector
- 5935-00-274-7348 MPN AN3106B20-20PElectrical Plug Connector
- 5930-00-548-9356 MPN UG45UPART6Switch Actuator Adapter
- 5935-01-202-8369 MPN AN3106A24-2SElectrical Plug Connector
- 5305-00-150-9565 MPN AN509-516R15Machine Screw
- 5305-00-180-0011 MPN AN525-10R9Machine Screw
- 5305-00-206-5990 MPN AN565A6L4Setscrew
- 5305-00-264-2367 MPN AN515C8-18Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-513-9187 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN3C62A | Aeronautical Standards Group |
AN3C62A | Aeronautical Standards Group |
AN3C62A | Aeronautical Standards Group |
AN3C62A | Aeronautical Standards Group |
AN3C62A | Aeronautical Standards Group |
AN3C62A | Aeronautical Standards Group |