NSN 5306-01-513-9851
Coaxial Connector
Between 2.516 inches and 2.546 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS6605-33 for national stock number 5306015139851.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-513-9851.
-
MPN or Model
NAS6605-33
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 2.516 inches and 2.546 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
0.307 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 2.052 inches and 2.072 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4140 -
Material Specification
Mil-s-5626 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-083-0467 MPN 205-060-771-001Adjustable Bellcrank Plate
- 1560-00-085-7370 MPN 204-001-358-001Cyclic Arm Assembly
- 1560-00-097-8470 MPN 209-075-276-1Re Support Assembly
- 1560-00-106-5891 MPN 205-030-007-27Aircraft Structural Plate
- 1560-00-106-5912 MPN 205-030-007-103Aircraft Structural Plate
- 1560-00-121-1158 MPN 205-030-876-3Lower Fuselage Stiffener
- 1560-00-121-1188 MPN 204-031-617-93Cabin Roof Structure Frame
- 1560-00-176-1472 MPN 209-030-806-81Tai Longeron Splice
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-513-9851 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6605-33 | Bell Helicopter Textron Inc. |
NAS6605-33 | Bell Helicopter Textron Inc. |
NAS6605-33 | Bell Helicopter Textron Inc. |
NAS6605-33 | Bell Helicopter Textron Inc. |
NAS6605-33 | Bell Helicopter Textron Inc. |
NAS6605-33 | Bell Helicopter Textron Inc. |
NAS6605-33 | Bell Helicopter Textron Inc. |
NAS6605-33 | Bell Helicopter Textron Inc. |
NAS6605-33 | Bell Helicopter Textron Inc. |
NAS6605-33 | Bell Helicopter Textron Inc. |