NSN 5306-01-514-1898
Wheel Bolt
2.500 inches fastener length, hexagon head style, 0.281 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number FIG 120-126 for national stock number 5306015141898.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-514-1898.
-
MPN or Model
FIG 120-126
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.280 inches -
Fastener Length
2.500 inches -
Head Style
Hexagon -
Head Height
0.281 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Hole Diameter
0.070 inches -
Grip Diameter
Between 0.495 inches and 0.499 inches -
End Application
Lube s&c system -
Thread Diameter
0.500 inches -
Grip Length
Between 1.190 inches and 1.250 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
20 -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-085-7773 MPN 21C2206-021Holding Pad
- 4920-00-212-3413 MPN 11C1052P1Interface Device Adapter Assembly
- 4920-00-471-1044 MPN 1C5757P35Support S Foot Assy
- 5930-00-891-1676 MPN 874C224P4Pressure Switch
- 5905-00-957-8987 MPN R984P2901AInductive Wire Wound Fixed Resistor
- 5905-00-958-3934 MPN R983P5621BFilm Fixed Resistor
- 5905-01-249-6996 MPN J690P3169AInductive Wire Wound Fixed Resistor
- 4920-01-439-5528 MPN 3R1023G01Aircraft Engine Maintenance Machining Fixture
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-514-1898 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FIG 120-126 | General Electric Company |
MS9505-25 | Society Of Automotive Engineers Inc |
MS9505-25 | Military Standards |
MS9505-25 | Sae International |
MS9505-25 | Sae International |