NSN 5306-01-514-6535
Coaxial Connector
0.345 inches fastener length, hexagon head style, 0.110 inches head height, width between flats: 0.410 inches .
Manufacturer part number NAS6603-37 for national stock number 5306015146535.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-514-6535.
-
MPN or Model
NAS6603-37
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
0.345 inches -
Head Style
Hexagon -
Head Height
0.110 inches -
Width Between Flats
0.410 inches -
Grip Diameter
Between 0.1845 inches and 0.1850 inches -
Thread Diameter
0.190 inches -
Grip Length
0.345 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
1800 pounds per square inch -
Thread Pitch In Millimeters
0.5 -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-688-6000 MPN NAS705T2Stud Terminal
- 5940-01-425-7398 MPN NAS1063C8-302Terminal Board Marker Strip
- 5935-01-613-0211 MPN MS31081R-22-10SElectrical Plug Connector
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-004-5069 MPN MS27039-5-17Machine Screw
- 5305-00-020-2826 MPN NAS1221-08-10PMachine Screw
- 5305-00-052-5949 MPN MS35198-8Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-514-6535 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6603-37 | National Aerospace Standards |