NSN 5306-01-515-3557
Coaxial Connector
0156 oversize grip diameter.
Manufacturer part number NAS6603D9Y for national stock number 5306015153557.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-515-3557.
-
MPN or Model
NAS6603D9Y
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 0.892 inches and 0.922 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.2172 inches and 0.2182 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
End Application
C-130 aircraft -
Thread Diameter
0.190 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.156 inches first hole and 1.206 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-180-2603 MPN NAS1650-106SNFElectrical Receptacle Connector
- 5940-01-381-7237 MPN NAS1063B141-155Terminal Board Marker Strip
- 5305-00-035-5385 MPN NAS1581A3H6TClose Tolerance Screw
- 5305-00-052-9055 MPN MS24630-40Tapping Screw
- 5305-00-058-0505 MPN NAS1351-3-10PSocket Head Cap Screw
- 5305-00-059-3670 MPN NAS1635+3+44Machine Screw
- 5305-00-074-4517 MPN NAS1156-9Close Tolerance Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-515-3557 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6603D9Y | National Aerospace Standards |
NAS6603-9DY | National Aerospace Standards |