NSN 5306-01-515-4548
Coaxial Connector
2.844 inches fastener length, dished hexagon head style, between 0.219 inches and 0.234 inches head height, width between flats: between 0.679 inches and 0.690 inches .
Manufacturer part number NAS1307-36D for national stock number 5306015154548.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-515-4548.
-
MPN or Model
NAS1307-36D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
2.844 inches -
Head Style
Dished hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.679 inches and 0.690 inches -
Grip Diameter
Between 0.436 inches and 0.437 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.437 inches -
Grip Length
Between 2.240 inches and 2.260 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.644 inches first hole -
Material
Steel comp 4340 or steel comp 8740 -
Material Specification
Ams6415 assn standard 1st material response or ams6322 assn standard 2nd material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, tyii, cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-6507 MPN NAS1063A5-441Terminal Board Marker Strip
- 5940-01-435-3634 MPN NAS1063C2-21FTerminal Board Marker Strip
- 5940-01-470-3346 MPN NAS1063A2-107BATerminal Board Marker Strip
- 5935-01-581-2487 MPN MS27488-20-2Electrical Connector End Seal Plug
- 5930-00-964-4485 MPN NAS1072-2Switch Guard
- 5935-01-323-4641 MPN MS33687-24-28PElectrical Connector Insert
- 5305-00-046-6987 MPN NAS1101E06-12BMachine Screw
- 5305-00-058-7613 MPN MS24694S133Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-515-4548 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1307-36D | National Aerospace Standards |
Stock Check
- NE: 905
- NS: 23