NSN 5306-01-517-4090
Coaxial Connector
1.899 inches fastener length, double hexagon w/hole head style, between 0.340 inches and 0.388 inches head height, width between flats: between 0.490 inches and 0.507 inches .
Manufacturer part number BACB30LE6K20 for national stock number 5306015174090.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-517-4090.
-
MPN or Model
BACB30LE6K20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.643 inches -
Fastener Length
1.899 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.340 inches and 0.388 inches -
Width Between Flats
Between 0.490 inches and 0.507 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
Between 0.081 inches and 0.101 inches -
Grip Diameter
0.3735 inches -
Thread Diameter
0.375 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
200000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Bms10-85 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-073-6979 MPN A02R2578-1Lubricating Oil Tank
- 1560-00-088-2008 MPN 5-58314Rear Wheel Steering Drum
- 5985-00-108-2372 MPN 25-66512-6Antenna
- 1560-00-123-9723 MPN 65-11602-8Aft Engine Fitting
- 1560-00-130-0817 MPN 5-96126-25Aircraft Access Cover
- 1680-00-330-6640 MPN 90-3564Stabilizer Trim Cap
- 1680-00-347-3104 MPN 90-2276-4Aircraft Control Tube Assembly
- 4820-00-529-4232 MPN 10-3000-16Safety Relief Valve
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-517-4090 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LE6K20 | The Boeing Company |
Stock Check
![](/public/images/partscage_shelf3.png)
- NS: 88
- NE: 724
- SV: 1
- AR: 1