NSN 5306-01-517-4099
Coaxial Connector
1.889 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30LJ4C24 for national stock number 5306015174099.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-517-4099.
-
MPN or Model
BACB30LJ4C24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.389 inches -
Fastener Length
1.889 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2445 inches and 0.2450 inches -
Thread Diameter
0.250 inches -
Grip Length
1.500 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
90000 pounds per square inch -
Material
Iron alloy 660 -
Surface Treatment
Chromium -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-012-1614 MPN 65-22444-19Eighth Stage Suppl Duct Assembly
- 4820-00-202-5806 MPN 10-1472-3Check Valve
- 1680-00-217-5134 MPN 5-53182Aircraft Gearbox Assembly
- 1560-00-325-1439 MPN 6-72093-3001Aircraft Structural Plate
- 1560-00-333-6636 MPN 5-65509-3Aileron Control Quadrant
- 1560-00-333-6737 MPN 6-72442Outboard Aileron Retainer
- 1560-00-508-8248 MPN 5-40700-9Aircraft Structural Component Support
- 1560-00-516-1950 MPN 69-21376-1Track Bracket Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-517-4099 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LJ4C24 | The Boeing Company |