NSN 5306-01-517-4100
Coaxial Connector
1.829 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30LJ4U22 for national stock number 5306015174100.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-517-4100.
-
MPN or Model
BACB30LJ4U22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.389 inches -
Fastener Length
1.829 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
0.2490 inches -
Thread Diameter
0.250 inches -
Grip Length
1.375 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
90000 pounds per square inch -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-011-0674 MPN 65-5345-16Aircraft Trim Tab
- 1680-00-068-2535 MPN 5-96174-3Pivot Fork Assembly
- 1560-00-340-5938 MPN 9-36843-8Escape Hatch Latch Hook
- 1680-00-340-7018 MPN 5-53501-16Remote Control Lever
- 1560-00-445-7472 MPN 5-96276-6Aircraft Beam
- 1560-00-564-2513 MPN 5-73115-42Aircraft Leading Edge
- 1560-00-586-9162 MPN 5-86559-7Gap Wing Cover
- 1680-00-611-8944 MPN 29-8867-2Stabilizer Tr Guard
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-517-4100 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LJ4U22 | The Boeing Company |