NSN 5306-01-517-4107
Coaxial Connector
3.201 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30LJ4C45 for national stock number 5306015174107.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-517-4107.
-
MPN or Model
BACB30LJ4C45
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.389 inches -
Fastener Length
3.201 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2445 inches and 0.2450 inches -
Thread Diameter
0.250 inches -
Grip Length
2.812 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
90000 pounds per square inch -
Material
Iron alloy 660 -
Surface Treatment
Chromium -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-015-8437 MPN 64-8328-874Nose Cowl Attaching Ring
- 1560-00-073-4081 MPN 107C2523-6Aircraft Structural Component Support
- 1560-00-217-5251 MPN 6-53002Battery Jar Cup Assembly
- 1560-00-231-9229 MPN 5-89825-3008Aircraft Structural Panel
- 5935-00-283-5510 MPN 25-76186-5Plug Dummy Connector
- 1560-00-571-8391 MPN 50-3946-25Aircraft Access Cover
- 1560-00-572-8439 MPN 90-2251-4Control Mechanism Arm
- 1560-00-594-6398 MPN 65-23053-5Safety Disconnect Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-517-4107 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LJ4C45 | The Boeing Company |