NSN 5306-01-517-4110
Coaxial Connector
19.047 inches fastener length, dished hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number BACB30LM8D293 for national stock number 5306015174110.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-517-4110.
-
MPN or Model
BACB30LM8D293
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
19.047 inches -
Head Style
Dished hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Hole Diameter
Between 0.106 inches and 0.116 inches -
Grip Diameter
Between 0.3729 inches and 0.3735 inches -
Thread Diameter
0.500 inches -
Grip Length
18.312 inches -
Hole Quantity
2 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Round -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-226-5779 MPN 5-87470-93Aircraft Door
- 5905-00-286-4794 MPN BACRH14U267R0BFFilm Fixed Resistor
- 1560-00-325-1358 MPN 5-66153-2003Aircraft Door
- 1560-00-347-3075 MPN 5-71789-20Aircraft Access Cover
- 5940-00-397-3630 MPN BACS13S460CGrounding Metallic Shielded Cable Ferrule
- 1560-00-516-1554 MPN 65-13336-2Track Bracket Assembly
- 1680-00-522-6016 MPN 36-3838-2Elec Actuator Angle
- 5930-00-655-4241 MPN 206-4597916-6Toggle Switch
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-517-4110 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LM8D293 | The Boeing Company |