NSN 5306-01-517-4111
Coaxial Connector
0.595 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number BACB30LM3SU4 for national stock number 5306015174111.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-517-4111.
-
MPN or Model
BACB30LM3SU4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
0.595 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
0.1890 inches -
Thread Diameter
0.190 inches -
Grip Length
0.250 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-172-0485 MPN 10-60824-13Aircraft Fairing
- 1560-00-342-1442 MPN 6-56571-3Aileron Control Fork Assembly
- 5935-00-350-1518 MPN BACC45DS16C05P8Electrical Plug Connector
- 5905-00-438-0506 MPN TR4 4.99KOHMSPORM2PCTFilm Fixed Resistor
- 1560-00-586-8619 MPN 5-89351-45Wing Panel Assembly
- 1560-00-611-8893 MPN 5-86560-165Gap Wing Cover
- 1560-00-620-7547 MPN 65-2220-3Aircraft Structural Plate
- 1560-00-629-3957 MPN 65-2220-23Stabilizer Seal Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-517-4111 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LM3SU4 | The Boeing Company |