NSN 5306-01-517-4112
Coaxial Connector
1.890 inches fastener length, dished hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number BACB30LM6D21 for national stock number 5306015174112.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-517-4112.
-
MPN or Model
BACB30LM6D21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
1.890 inches -
Head Style
Dished hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Hole Diameter
Between 0.106 inches and 0.116 inches -
Grip Diameter
Between 0.3729 inches and 0.3735 inches -
Thread Diameter
0.375 inches -
Grip Length
1.312 inches -
Hole Quantity
2 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Round -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-012-4592 MPN 114S2555-21Floor Panel Assembly
- 1560-00-015-8501 MPN 65-10606-151Aircraft Structural Plate
- 5905-00-089-9535 MPN BACR14AM202Inductive Wire Wound Fixed Resistor
- 1560-00-304-4691 MPN 3-87605Flexible Signal Guard
- 1680-00-347-6589 MPN 60-3305Transmitter Dri Pin
- 4920-00-532-2214 MPN F71215-6Aircraft Component Test Plug
- 1560-00-533-9123 MPN 50-10647-2Override Booster Screen Assembly
- 1560-00-592-5201 MPN 5-89348-49Trailing Edge Panel
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-517-4112 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LM6D21 | The Boeing Company |