NSN 5306-01-517-5179
Coaxial Connector
2.014 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30LJ4D26 for national stock number 5306015175179.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-517-5179.
-
MPN or Model
BACB30LJ4D26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.389 inches -
Fastener Length
2.014 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Hole Diameter
Between 0.076 inches and 0.086 inches -
Grip Diameter
Between 0.2479 inches and 0.2485 inches -
Thread Diameter
0.250 inches -
Grip Length
1.625 inches -
Hole Quantity
2 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
90000 pounds per square inch -
Hole Configuration Style
Round -
Material
Iron alloy 660 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-039-7170 MPN BACR14CH35R00CFInductive Wire Wound Fixed Resistor
- 1680-00-073-4074 MPN 107C2532-4Bell Crank
- 5940-00-113-8184 MPN BACT12AC50Lug Terminal
- 5945-00-179-7932 MPN 10-20283Electromagnetic Relay
- 1560-00-225-5536 MPN 65-16032-24Frame Ring Strip
- 1680-00-340-6005 MPN 90-1560Aircraft Control Tube Assembly
- 1560-00-340-9448 MPN 60-2614Door Latch Guide Block
- 1560-00-571-1922 MPN 30-2513Terminal Retainer
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-517-5179 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LJ4D26 | The Boeing Company |