NSN 5306-01-517-5182
Coaxial Connector
2.826 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30LJ4D39 for national stock number 5306015175182.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-517-5182.
-
MPN or Model
BACB30LJ4D39
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.389 inches -
Fastener Length
2.826 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Hole Diameter
Between 0.076 inches and 0.086 inches -
Grip Diameter
Between 0.2479 inches and 0.2485 inches -
Thread Diameter
0.250 inches -
Grip Length
2.437 inches -
Hole Quantity
2 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
90000 pounds per square inch -
Hole Configuration Style
Round -
Material
Iron alloy 660 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-115-9841 MPN 9-63895-3Aircraft Stiffener Rib
- 4920-00-127-5738 MPN 09500-9067-1Test Stand Line Printer
- 5905-00-152-9936 MPN BACRH14U590R0EFFilm Fixed Resistor
- 4920-00-586-6684 MPN TE65-73720-2Aircraft Maintenance Fixture
- 1560-00-625-6626 MPN 5-97264-23Aircraft Door
- 1560-00-715-5729 MPN 39-10456Doppler Radome Latch Guide
- 1560-00-739-0312 MPN 69-1422-4Slide Clamp Assembly
- 1560-00-758-9368 MPN 63-9273-1Wire Bundle Spacer
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-517-5182 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LJ4D39 | The Boeing Company |