NSN 5306-01-517-5183
Coaxial Connector
3.889 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30LJ4D56 for national stock number 5306015175183.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-517-5183.
-
MPN or Model
BACB30LJ4D56
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.389 inches -
Fastener Length
3.889 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Hole Diameter
Between 0.076 inches and 0.086 inches -
Grip Diameter
Between 0.2479 inches and 0.2485 inches -
Thread Diameter
0.250 inches -
Grip Length
3.500 inches -
Hole Quantity
2 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
90000 pounds per square inch -
Hole Configuration Style
Round -
Material
Iron alloy 660 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-104-8560 MPN 10-2431-501Pressure Switch
- 4820-00-202-5851 MPN 10-1310-2Check Valve
- 1560-00-326-2320 MPN 9-56402Spoiler Hinge
- 5940-00-557-4338 MPN BACT12AC25Lug Terminal
- 1680-00-592-7820 MPN 25-5480-1Safety P Pouch Assy
- 1560-00-651-3650 MPN 26-6260-1Escape Lifter Pull Rod
- 1560-00-761-7926 MPN A02P4128-2Valve Mountin Cover
- 1560-00-773-3938 MPN 3-69434-5Latch Arm Adjusting Shaft
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-517-5183 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LJ4D56 | The Boeing Company |