NSN 5306-01-517-6568
Coaxial Connector
W/drilled shank bolt.
Manufacturer part number NAS6705D25 for national stock number 5306015176568.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-517-6568.
-
MPN or Model
NAS6705D25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.444 inches -
Fastener Length
2.031 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.081 inches first hole -
Thread Diameter
0.3125 inches -
Grip Length
1.562 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.751 inches first hole -
Material
Iron alloy 660 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-079-7709 MPN 65-37851-8Lockout Actuator
- 1560-00-213-4000 MPN 6-53943-1Trim Aisle St Indicator Assembly
- 1560-00-326-9589 MPN BACR11AE2Receptacle
- 1560-00-411-7970 MPN 90-7934Aircraft Structural Plate
- 1560-00-516-1504 MPN 65-13336-93Track Bracket Assembly
- 1560-00-516-1937 MPN 69-11707-6Track Support Bracket Assembly
- 1560-00-574-9723 MPN 50-2669-2Wing Tip Duct Assembly
- 1680-00-622-7580 MPN 25-5283-1Downward Hose Assy
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-517-6568 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6705D25 | The Boeing Company |