NSN 5306-01-517-6569
Coaxial Connector
W/patch type locking element.
Manufacturer part number NAS6704P9 for national stock number 5306015176569.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-517-6569.
-
MPN or Model
NAS6704P9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.400 inches -
Fastener Length
0.987 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.2500 inches -
Grip Length
0.552 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-110-0993 MPN BACR14CJ123Composition Fixed Resistor
- 5935-00-284-7315 MPN BACC45AC8A4PWElectrical Receptacle Connector
- 1560-00-304-5072 MPN 6-72120-1Upper Pin Latch Catch
- 1560-00-304-5081 MPN 6-72121-2Upper Pin Latch Catch
- 5945-00-581-7356 MPN 10-60042Electromagnetic Relay
- 1560-00-601-9409 MPN 29-4449-2Rudder Pedal Detent
- 4920-00-608-8205 MPN F52550-1Router Template
- 1560-00-620-8794 MPN 34-1308-4Aircraft Access Cover
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-517-6569 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6704P9 | The Boeing Company |