NSN 5306-01-517-6571
Coaxial Connector
1.502 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.429 inches and 0.439 inches .
Manufacturer part number NAS6704G17 for national stock number 5306015176571.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-517-6571.
-
MPN or Model
NAS6704G17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
1.502 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.2500 inches -
Grip Length
1.062 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head -
Material
Iron alloy 660 -
Surface Treatment
Chromate -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-022-7749 MPN 107S8310-2Aircraft Window Panel
- 1560-00-073-1053 MPN A02S1002-14Door Assembly
- 5940-00-113-9826 MPN BACT12AC14Lug Terminal
- 1560-00-222-0899 MPN 66-18895-2Slide Block
- 4920-00-249-3622 MPN 2PRE65B00163-1Aircraft Maintenance Fixture
- 1680-00-346-2143 MPN 3-93533Windshield Stop
- 5940-00-494-6827 MPN BACS13CF-4Conductor Splice
- 1560-00-524-0567 MPN 6-65289Aircraft Structural Plate
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-517-6571 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6704G17 | The Boeing Company |