NSN 5306-01-517-8378
Coaxial Connector
2.069 inches fastener length, dished hexagon head style, between 0.219 inches and 0.234 inches head height, width between flats: between 0.678 inches and 0.690 inches .
Manufacturer part number NAS6707D22 for national stock number 5306015178378.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-517-8378.
-
MPN or Model
NAS6707D22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.669 inches and 0.719 inches -
Fastener Length
2.069 inches -
Head Style
Dished hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.678 inches and 0.690 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Shank Unthreaded Hole Diameter
0.111 inches first hole -
Thread Diameter
0.438 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.893 inches first hole and 2.243 inches first hole -
Surface Finish
32.0 microinches bearing surface of head -
Material
Iron alloy 660 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-348-5473 MPN NAS1063C12-3Terminal Board
- 5940-01-418-3341 MPN NAS1063D-1-6Terminal Board Marker Strip
- 5940-01-444-8249 MPN NAS1063A2-107BUTerminal Board Marker Strip
- 1680-01-501-4762 MPN NAS42DD6-70FCAircr Sleeve Spacer
- 5305-00-001-4713 MPN NAS1102C04-18Machine Screw
- 5305-00-007-2954 MPN NAS1743C06T8USocket Head Cap Screw
- 5305-00-008-9115 MPN NAS1190E02T7LSocket Head Cap Screw
- 5305-00-009-9193 MPN NAS1218-06E2Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-517-8378 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6707D22 | National Aerospace Standards |