NSN 5306-01-517-8379
Coaxial Connector
W/drilled shank bolt.
Manufacturer part number NAS6706D18 for national stock number 5306015178379.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-517-8379.
-
MPN or Model
NAS6706D18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.694 inches and 1.804 inches -
Fastener Length
1.819 inches -
Head Style
Dished hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.678 inches and 0.690 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Shank Unthreaded Hole Diameter
0.111 inches first hole -
Thread Diameter
0.438 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.747 inches first hole -
Surface Finish
32.0 microinches bearing surface of head -
Material
Iron alloy 660 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-872-0888 MPN NAS1745-3Conductor Splice
- 5940-01-361-8073 MPN NAS1746-6Conductor Splice
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 5305-00-139-3223 MPN NAS1402-9Machine Screw
- 5305-00-163-2685 MPN NAS1133-24Close Tolerance Screw
- 5305-00-205-3917 MPN MS27039-8-08Machine Screw
- 5305-00-211-8899 MPN MS27039BP1-12Machine Screw
- 5305-00-225-9091 MPN MS90726-36Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-517-8379 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6706D18 | National Aerospace Standards |