NSN 5306-01-518-1627
Coaxial Connector
W/drilled head shank.
Manufacturer part number NAS6208-38DH for national stock number 5306015181627.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-518-1627.
-
MPN or Model
NAS6208-38DH
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
0.903 inches -
Head Style
Dished hexagon -
Head Height
0.257 inches -
Width Between Flats
0.746 inches -
Grip Diameter
0.4990 inches -
Thread Diameter
0.500 inches -
Grip Length
2.375 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
38.0 rockwell c -
Material
Steel comp e4340 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-447-2944 MPN NAS1063A3-504ALTerminal Board Marker Strip
- 5940-01-384-3878 MPN NAS1063A2TB107TTerminal Board Marker Strip
- 5305-00-005-5921 MPN NAS514P632-28PMachine Screw
- 5305-00-007-2952 MPN NAS1100E02-2Machine Screw
- 5305-00-069-2597 MPN MS35202-71Machine Screw
- 5305-00-075-9047 MPN NAS1204-1Close Tolerance Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-518-1627 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6208-38DH | National Aerospace Standards |