NSN 5306-01-518-3012
Coaxial Connector
0.864 inches fastener length, dished hexagon head style, 0.090 inches head height, width between flats: 0.430 inches .
Manufacturer part number NAS103-3 for national stock number 5306015183012.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-518-3012.
-
MPN or Model
NAS103-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
0.864 inches -
Head Style
Dished hexagon -
Head Height
0.090 inches -
Width Between Flats
0.430 inches -
Hole Diameter
0.190 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
0.526 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Hole Configuration Style
Hexagon longitudinal hole -
Material
Steel comp 4340 -
Material Specification
Ams6434 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-116, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-539-7169 MPN NAS543-2Toggle Switch
- 1680-00-604-8346 MPN NAS26-3Tank Strap Trunnion
- 5935-00-779-8222 MPN NAS1196-13Electrical Connector Shell
- 5940-01-451-2667 MPN NAS1063A10-105BRTerminal Board Marker Strip
- 5940-01-510-2081 MPN NAS1063A7Terminal Board Marker Strip
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-007-1559 MPN NAS1100C04-16PMachine Screw
- 5305-00-008-2062 MPN NAS1509-21Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-518-3012 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS103-3 | National Aerospace Standards |