NSN 5306-01-518-4652
Coaxial Connector
0.902 inches fastener length, hexagon head style, between 0.312 inches and 0.327 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number NAS1310-28 for national stock number 5306015184652.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-518-4652.
-
MPN or Model
NAS1310-28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.625 inches -
Fastener Length
0.902 inches -
Head Style
Hexagon -
Head Height
Between 0.312 inches and 0.327 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 2.642 inches and 2.662 inches -
Thready Qty Per Inch (tpi)
18 -
Part Name Assigned By Controlling Agency
Bolt tension hexagon -
Material
Steel comp 4340 -
Material Specification
Mil-s-6049 military standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-082-4892 MPN NAS707-6Stud Terminal
- 5935-01-093-6382 MPN NAS1650R22B41SNElectrical Receptacle Connector
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 5305-00-050-4271 MPN MS24667-2Socket Head Cap Screw
- 5305-00-052-8887 MPN MS24630-24Tapping Screw
- 5305-00-104-7608 MPN NAS1352C3LN40Socket Head Cap Screw
- 5305-00-108-0923 MPN NAS1300C3T12Thumbscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-518-4652 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1310-28 | National Aerospace Standards |