NSN 5306-01-518-5116
Coaxial Connector
0.425 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: 0.439 inches .
Manufacturer part number NAS6604L6 for national stock number 5306015185116.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-518-5116.
-
MPN or Model
NAS6604L6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.250 inches -
Fastener Length
0.425 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
0.439 inches -
Grip Diameter
0.190 inches -
End Application
Helicopter chinook ch-47d -
Thread Diameter
0.250 inches -
Grip Length
0.720 inches -
Thready Qty Per Inch (tpi)
28 -
Part Name Assigned By Controlling Agency
Bolt hex head self locking -
Material
Steel comp 4140 -
Material Specification
Amil-s-5626 military specification 4th material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-501-4805 MPN NAS42DD8-80FCAircr Sleeve Spacer
- 5305-00-007-0278 MPN NAS1100C00-8Machine Screw
- 5305-00-020-3625 MPN NAS1100C06-6Machine Screw
- 5305-00-051-2355 MPN NAS514P832-28Machine Screw
- 5305-00-052-8880 MPN MS24630-12Tapping Screw
- 5305-00-058-6611 MPN NAS662C2LER7Socket Head Cap Screw
- 5305-00-058-9387 MPN MS51977-66Setscrew
- 5305-00-078-8606 MPN NAS560HK3-15Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-518-5116 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6604L6 | National Aerospace Standards |