NSN 5306-01-519-1517
Coaxial Connector
Between 1.103 inches and 1.133 inches fastener length, 0.312 inches thread diameter, 24 thready qty per inch (tpi), hardness rating: 39.0 rockwell c and 43.0 rockwell c .
Manufacturer part number MS21134-05009 for national stock number 5306015191517.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-519-1517.
-
MPN or Model
MS21134-05009
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.541 inches -
Fastener Length
Between 1.103 inches and 1.133 inches -
End Application
Mv-22 aircraft -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Criticality Code Justification
Agav -
Part Name Assigned By Controlling Agency
Bolt, tension, steel, 180 ksi ftu, 450 degrees f external wrenching, spline drive, flanged -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 or steel comp 6150 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response or mil-s-8503 military specification 4th material response -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-045-8693 MPN NAS709T1Stud Terminal
- 5940-00-268-2622 MPN NAS191-3Terminal Board
- 1680-01-563-6041 MPN NAS1714D2-16SWAircraft Loop Clamp
- 5305-00-007-3026 MPN NAS1102E04-7PMachine Screw
- 5305-00-052-5694 MPN NAS1352-04H4Socket Head Cap Screw
- 5305-00-052-7423 MPN MS35198-90Machine Screw
- 5305-00-068-0519 MPN MS35190-312Machine Screw
- 5305-00-104-7608 MPN NAS1352C3LN40Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-519-1517 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21134-05009 | National Aerospace Standards |
MS21134-05009 | National Aerospace Standards |