NSN 5306-01-519-2611
Coaxial Connector
Flat countersunk undercut head style, 0.383 inches head diameter, 0.083 inches head height, grip diameter: 0.188 inches .
Manufacturer part number BACB30LH3K2 for national stock number 5306015192611.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-519-2611.
-
MPN or Model
BACB30LH3K2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Head Style
Flat countersunk undercut -
Head Diameter
0.383 inches -
Head Height
0.083 inches -
Grip Diameter
0.188 inches -
End Application
Boeing 757 -
Thread Diameter
0.183 inches -
Grip Length
0.125 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Surface Treatment
Aluminum -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-073-2820 MPN 65-10604-57Aircraft Fairing
- 1560-00-225-0941 MPN 69-31457-2Aircraft Structural Component Support
- 1560-00-231-9228 MPN 5-89825-3007Aircraft Structural Panel
- 5975-00-280-9214 MPN 6-25768-875Electrical Box Connector
- 1560-00-331-4844 MPN 5-88468Aircraft Access Cover
- 1560-00-333-6780 MPN 9-62553-2Aircraft Access Cover
- 1560-00-563-9148 MPN 9-59107-18Compound Balan Seal
- 1560-00-575-6017 MPN 5-86560-163Gap Wing Cover
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-519-2611 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LH3K2 | The Boeing Company |
BACB30LH3K2 | The Boeing Company |
BACB30LH3K2 | The Boeing Company |
BACB30LH3K2 | The Boeing Company |
BACB30LH3K2 | The Boeing Company |
BACB30LH3K2 | The Boeing Company |
BACB30LH3K2 | The Boeing Company |
BACB30LH3K2 | The Boeing Company |
BACB30LH3K2 | The Boeing Company |
BACB30LH3K2 | The Boeing Company |
BACB30LH3K2 | The Boeing Company |
Stock Check
- NS: 76
- NE: 566