NSN 5306-01-519-5326
Coaxial Connector
1.968 inches fastener length, hexagon head style, 0.250 inches head height, width between flats: 0.870 inches .
Manufacturer part number NAS1108-17W for national stock number 5306015195326.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-519-5326.
-
MPN or Model
NAS1108-17W
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.453 inches -
Fastener Length
1.968 inches -
Head Style
Hexagon -
Head Height
0.250 inches -
Width Between Flats
0.870 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
1.515 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type i, class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3971 MPN NAS1063D2-2Terminal Board Marker Strip
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5305-00-008-5899 MPN NAS1191-06P10LMachine Screw
- 5305-00-040-9560 MPN NAS1081-0202Setscrew
- 5305-00-051-2330 MPN MS51958-99Machine Screw
- 5305-00-116-1483 MPN NAS1100CE3-10Machine Screw
- 5305-00-121-3564 MPN MS27577-4-16Close Tolerance Screw
- 5305-00-143-1840 MPN MS21091-04004Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-519-5326 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1108-17W | National Aerospace Standards |