NSN 5306-01-519-5327
Coaxial Connector
2.468 inches fastener length, hexagon head style, 0.250 inches head height, width between flats: 0.870 inches .
Manufacturer part number NAS1108-25W for national stock number 5306015195327.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-519-5327.
-
MPN or Model
NAS1108-25W
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.453 inches -
Fastener Length
2.468 inches -
Head Style
Hexagon -
Head Height
0.250 inches -
Width Between Flats
0.870 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
2.015 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type i, class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-6036 MPN NAS1063A5-431Terminal Board Marker Strip
- 5940-01-655-3766 MPN NAS1389-8Conductor Splice
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5305-00-061-0217 MPN NAS1081C3A5LSetscrew
- 5305-00-069-2198 MPN NAS1505-13Close Tolerance Screw
- 5305-00-113-3732 MPN MS27039C0805Machine Screw
- 5305-00-159-5605 MPN NAS601-36Machine Screw
- 5305-00-177-5484 MPN NAS1300C08T6Thumbscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-519-5327 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1108-25W | National Aerospace Standards |