NSN 5306-01-520-8960
Coaxial Connector
1.6875 inches fastener length, double hexagon w/hole head style, 0.340 inches head height, width between flats: between 0.490 inches and 0.507 inches .
Manufacturer part number BACB30LE6K19 for national stock number 5306015208960.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-520-8960.
-
MPN or Model
BACB30LE6K19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.500 inches -
Fastener Length
1.6875 inches -
Head Style
Double hexagon w/hole -
Head Height
0.340 inches -
Width Between Flats
Between 0.490 inches and 0.507 inches -
Extended Washer Diameter
0.644 inches -
Extended Washer Thickness
0.091 inches -
Hole Diameter
0.180 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
1.1875 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
200000 pounds per square inch -
Hole Configuration Style
Double hexagon longitudinal hole -
Material
Stainless steel -
Material Specification
Ams5737 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Bms10-85, type i assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-073-2404 MPN 107D3240-6Driv Shaft Assembly
- 1560-00-115-9841 MPN 9-63895-3Aircraft Stiffener Rib
- 1680-00-153-5246 MPN 69-24383-1Cable Drum End Cap
- 1560-00-320-4902 MPN 5-86511-4Aircraft Structural Panel
- 1560-00-558-7373 MPN 5-87400-3001Aileron Gearbox Housing
- 1560-00-568-3502 MPN 9-56441Aircraft Structural Component Support
- 1560-00-588-0701 MPN 29-2829Inboard Plate Assembly
- 1560-00-610-2646 MPN 26-1948Nacelle Cowling Catch
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-520-8960 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LE6K19 | The Boeing Company |