NSN 5306-01-520-8961
Coaxial Connector
0.595 inches fastener length, flat countersunk head style, 0.383 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number BACB30LH3K4 for national stock number 5306015208961.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-520-8961.
-
MPN or Model
BACB30LH3K4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
0.595 inches -
Head Style
Flat countersunk -
Head Diameter
0.383 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
0.250 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel head -
Material Specification
Ams5737 assn standard single material response head -
Surface Treatment
Aluminum head -
Surface Treatment Specification
Bms10-85, type i assn standard single treatment response head -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-114-1325 MPN BACT12AC32Lug Terminal
- 1560-00-213-4019 MPN 9-21002-5Nacelle Cowling Latch Assembly
- 1560-00-332-2561 MPN 3-67297-1Latch Hook Retainer
- 1680-00-335-6816 MPN 9-55633Aircraft Gearbox Assembly
- 1560-00-463-7576 MPN 10-2455-36Aircraft Fuel Tank
- 1560-00-504-9826 MPN 65-13336-68Track Bracket Assembly
- 4820-00-563-6130 MPN 10-60508-3Butterfly Valve
- 1560-00-571-1244 MPN 9-54065-1Nose Wheel Steering Pull Bracket
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-520-8961 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LH3K4 | The Boeing Company |