NSN 5306-01-520-8964
Coaxial Connector
0.514 inches fastener length, flat countersunk head style, 0.510 inches head diameter, grip diameter: between 0.2479 inches and 1.2485 inches .
Manufacturer part number BACB30LH4-2 for national stock number 5306015208964.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-520-8964.
-
MPN or Model
BACB30LH4-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.389 inches -
Fastener Length
0.514 inches -
Head Style
Flat countersunk -
Head Diameter
0.510 inches -
Grip Diameter
Between 0.2479 inches and 1.2485 inches -
Thread Diameter
0.250 inches -
Grip Length
0.125 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel head -
Material Specification
Ams5737 assn standard single material response head -
Surface Treatment
Cadmium head -
Surface Treatment Specification
Qq-p-416, type ii federal specification single treatment response head -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-073-1143 MPN A02S1004-3Door Assembly
- 1560-00-073-4186 MPN 107C2514-4Bellcrank Assembly
- 4820-00-096-8739 MPN 3-55031-1Valve Seat
- 1560-00-233-1116 MPN 50-6237-3042Elevator Balance Weight
- 1560-00-314-9961 MPN 3-52815-2Bleeder Check Valve Sleeve
- 1560-00-564-4790 MPN 66-1449Aircraft Structural Component Support
- 1560-00-604-4195 MPN 65-3904-1Backing Board Assembly
- 1680-00-609-0031 MPN 25-5002-1Downward Hose Assy
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-520-8964 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LH4-2 | The Boeing Company |