NSN 5306-01-520-8965
Coaxial Connector
1.250 inches fastener length, double hexagon w/hole head style, 0.235 inches head height, width between flats: between 0.347 inches and 0.361 inches .
Manufacturer part number BACB30LE4U12 for national stock number 5306015208965.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-520-8965.
-
MPN or Model
BACB30LE4U12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.500 inches -
Fastener Length
1.250 inches -
Head Style
Double hexagon w/hole -
Head Height
0.235 inches -
Width Between Flats
Between 0.347 inches and 0.361 inches -
Extended Washer Diameter
0.470 inches -
Extended Washer Thickness
0.042 inches -
Hole Diameter
0.180 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
0.750 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
200000 pounds per square inch -
Hole Configuration Style
Double hexagon longitudinal hole -
Material
Stainless steel -
Material Specification
Ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35, type ii or viii federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-024-3913 MPN 9-23084-3Directional Control Linear Valve Sleeve And Slide
- 1560-00-034-3247 MPN 69-10476-4Cowl Support Rod Assembly
- 5940-00-082-4664 MPN BACT42C6A-1Terminal Board
- 1560-00-096-9690 MPN 6-48071Flap Bearing Nut Assembly
- 5950-00-133-8932 MPN 10-30400-505Transformer Assembly
- 1560-00-169-8872 MPN 5-96275-2000Aircraft Structural Component Support
- 4920-00-253-3923 MPN 4PRE65B00162Aircraft Maintenance Fixture
- 5905-00-285-0158 MPN BACRH14U90900EFFilm Fixed Resistor
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-520-8965 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LE4U12 | The Boeing Company |