NSN 5306-01-520-8967
Coaxial Connector
1.0325 inches fastener length, flat countersunk head style, 0.383 inches head diameter, grip diameter: between 0.311 inches and 1.325 inches .
Manufacturer part number BACB30LH3U11 for national stock number 5306015208967.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-520-8967.
-
MPN or Model
BACB30LH3U11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
1.0325 inches -
Head Style
Flat countersunk -
Head Diameter
0.383 inches -
Grip Diameter
Between 0.311 inches and 1.325 inches -
Thread Diameter
0.190 inches -
Grip Length
0.6875 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel head -
Material Specification
Ams5737 assn standard single material response head -
Surface Treatment
Passivate head -
Surface Treatment Specification
Qq-p-35, type ii or viii federal specification single treatment response head -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-011-0674 MPN 65-5345-14Aircraft Trim Tab
- 1560-00-073-2574 MPN 107S1116-1Alighting G Fitting
- 1560-00-073-5612 MPN A02E4049-1Heat And Vent Duct
- 4920-00-270-0701 MPN F80080-56Vent Cover Assembly
- 1680-00-393-9399 MPN 9-25697-4Control Lever
- 5935-00-465-3390 MPN BACC45FN18-31P7Electrical Receptacle Connector
- 1560-00-575-6291 MPN 5-71789-52Aircraft Tip
- 1560-00-608-7510 MPN 39-19662-3Tip Gear Wheel Hinge Fitting
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-520-8967 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LH3U11 | The Boeing Company |