NSN 5306-01-520-9127
Coaxial Connector
Between 2.825 inches and 2.855 inches fastener length, hexagon head style, between 0.312 inches and 0.327 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number NAS671031 for national stock number 5306015209127.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-520-9127.
-
MPN or Model
NAS671031
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
2.840 inches -
Fastener Length
Between 2.825 inches and 2.855 inches -
Head Style
Hexagon -
Head Height
Between 0.312 inches and 0.327 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.623 inches and 0.624 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-688-5996 MPN NAS707T2Stud Terminal
- 5940-01-384-0179 MPN NAS1063A20-4MLSTerminal Board Marker Strip
- 5305-00-007-1559 MPN NAS1100C04-16PMachine Screw
- 5305-00-007-2979 MPN NAS1352-3-6Socket Head Cap Screw
- 5305-00-021-3801 MPN MS35307-411Hexagon Head Cap Screw
- 5305-00-051-6521 MPN MS24693-S25Machine Screw
- 5305-00-057-4913 MPN MS24671-29Socket Head Cap Screw
- 5305-00-067-9900 MPN NASM51861-60Tapping Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-520-9127 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS671031 | National Aerospace Standards |
NAS6710-31 | National Aerospace Standards |
Stock Check
- NS: 84
- NE: 19