NSN 5306-01-521-5039
Coaxial Connector
Between 1.501 inches and 1.531 inches fastener length, dished hexagon head style, 0.188 inches head height, width between flats: between 0.554 inches and 0.564 inches .
Manufacturer part number NAS6706DU15 for national stock number 5306015215039.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-521-5039.
-
MPN or Model
NAS6706DU15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
Between 1.501 inches and 1.531 inches -
Head Style
Dished hexagon -
Head Height
0.188 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Grip Diameter
0.375 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
0.938 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.319 inches first hole -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard 1st material response or ams5732 assn standard 2nd material response or ams5737 assn standard 3rd material response or ams5853 assn standard 4th material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-303-7067 MPN NAS1747-11Conductor Splice
- 5940-01-381-7112 MPN NAS1063B236-245Terminal Board Marker Strip
- 5940-01-413-3016 MPN NAS1063B38-54Terminal Board Marker Strip
- 5940-01-625-6053 MPN NAS1063C6-2Terminal Board Marker Strip
- 5305-00-004-3170 MPN NAS1156-64Close Tolerance Screw
- 5305-00-007-9894 MPN NAS1102C04-10PMachine Screw
- 5305-00-008-5893 MPN NAS1102C08-8PMachine Screw
- 5305-00-038-8989 MPN NAS1352-4-20PSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-521-5039 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6706DU15 | National Aerospace Standards |