NSN 5306-01-521-5634
Coaxial Connector
0.808 inches fastener length, dished hexagon head style, 0.125 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS2814-7 for national stock number 5306015215634.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-521-5634.
-
MPN or Model
NAS2814-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
0.808 inches -
Head Style
Dished hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
End Application
Transport aircraft, cn235-10 nurtanio, next higher assembly is harness litter sup.-compartment passenger, national aerospace standards -
Thread Diameter
0.250 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
6980 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-460-1733 MPN NAS1745-14Conductor Splice
- 5940-01-396-9992 MPN NAS1063A6-TB9NTerminal Board Marker Strip
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 1560-01-659-0276 MPN 520-14082-2Aircraft Structural Component Support
- 5305-00-004-3129 MPN NAS1190C04P15LSocket Head Cap Screw
- 5305-00-008-5892 MPN NAS1102E08-30Machine Screw
- 5305-00-008-7878 MPN NAS1190C02T10LSocket Head Cap Screw
- 5305-00-043-0410 MPN NAS1123-1HClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-521-5634 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2814-7 | National Aerospace Standards |