NSN 5306-01-521-8116
Coaxial Connector
2.625 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS6205-35D for national stock number 5306015218116.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-521-8116.
-
MPN or Model
NAS6205-35D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
2.625 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
2.187 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.443 inches first hole -
Material
Steel comp 4340 or steel comp 8740 -
Material Specification
Ams 6415 assn standard 1st material response or ams 6322 assn standard 2nd material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, tyii, cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6205 professional/industrial association standard
More from these suppliers
- 5940-01-413-2999 MPN NAS1063B1-17Terminal Board Marker Strip
- 5940-01-451-2578 MPN NAS1063C3-539DTerminal Board Marker Strip
- 5305-00-006-0633 MPN NAS514P428-14PMachine Screw
- 5305-00-007-2962 MPN NAS1743C3T14Socket Head Cap Screw
- 5305-00-052-8875 MPN MS24630-3Tapping Screw
- 5305-00-156-1977 MPN NAS1100E3-8Machine Screw
- 5305-00-174-1201 MPN NAS335PA20Machine Screw
- 5305-00-182-9381 MPN NAS1100C4-22Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-521-8116 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6205-35D | National Aerospace Standards |