NSN 5306-01-522-0007
Coaxial Connector
1.902 inches fastener length, dished hexagon head style, 0.312 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number NAS6610-16 for national stock number 5306015220007.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-522-0007.
-
MPN or Model
NAS6610-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.902 inches -
Fastener Length
1.902 inches -
Head Style
Dished hexagon -
Head Height
0.312 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
End Application
C-5 aircraft -
Thread Diameter
0.625 inches -
Grip Length
1.000 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, shear -
Material
Steel comp 8740 -
Material Specification
Mil-s-5000 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2. Cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3975 MPN NAS1063B3-3Terminal Board Marker Strip
- 5305-00-001-4017 MPN NAS1352-3LE8PSocket Head Cap Screw
- 5305-00-051-6112 MPN NAS517-8-12Machine Screw
- 5305-00-052-7482 MPN MS35198-84Machine Screw
- 5305-00-052-8886 MPN MS24630-22Tapping Screw
- 5305-00-068-5398 MPN NAS1351C3H6Socket Head Cap Screw
- 5305-00-071-1774 MPN MS90725-121Hexagon Head Cap Screw
- 5305-00-151-9693 MPN NAS1633-34Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-522-0007 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6610-16 | National Aerospace Standards |
Stock Check
- NS: 6
- NE: 233