NSN 5306-01-522-5587
Coaxial Connector
Between 2.861 inches and 2.891 inches fastener length, double hexagon w/hole head style, 0.618 inches head height, width between flats: between 0.682 inches and 0.691 inches .
Manufacturer part number EWB0420D-10-30 for national stock number 5306015225587.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-522-5587.
-
MPN or Model
EWB0420D-10-30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.001 inches -
Fastener Length
Between 2.861 inches and 2.891 inches -
Head Style
Double hexagon w/hole -
Head Height
0.618 inches -
Width Between Flats
Between 0.682 inches and 0.691 inches -
Extended Washer Diameter
Between 0.521 inches and 0.531 inches -
Extended Washer Thickness
0.150 inches -
Hole Diameter
Between 0.050 inches and 0.060 inches -
Grip Diameter
Between 0.623 inches and 0.624 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
200000 pounds per square inch -
Hole Configuration Style
Double hexagon longitudinal hole -
Material
Iron alloy 660 -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-308-1806 MPN HT4028L7-9Close Tolerance Screw
- 5305-00-595-5986 MPN 76121-4-5Close Tolerance Screw
- 5305-00-845-9073 MPN SFT22-4A34Machine Screw
- 5305-01-025-6962 MPN ST3M714-4D15Close Tolerance Screw
- 5305-01-069-2728 MPN NAS1101E3-12Machine Screw
- 5305-01-086-6352 MPN 82605-94-6Socket Head Cap Screw
- 5305-01-158-5368 MPN SC2671-06-6Machine Screw
- 5305-01-213-1837 MPN 370216-66Externally Relieved Body Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-522-5587 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWB0420D-10-30 | Sps Technologies, Llc |
Stock Check
- NE: 468