NSN 5306-01-522-6834
Coaxial Connector
0156 oversize shank,restricted usage: for repair work only.
Manufacturer part number NAS6414A53X for national stock number 5306015226834.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-522-6834.
-
MPN or Model
NAS6414A53X
-
Schedule B
7616.10.6000 (Threaded fasteners of aluminum) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.6 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.759 inches -
Fastener Length
4.072 inches -
Head Style
Dished hexagon -
Head Height
0.438 inches -
Width Between Flats
Between 1.239 inches and 1.252 inches -
Grip Diameter
Between 0.889 inches and 0.890 inches -
End Application
Kc-135 aircraft -
Thread Diameter
0.875 inches -
Grip Length
3.438 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, tension, hex head, close tolerance, 6al-4v titanium alloy, short thread, reduced major thread diameter, nonlocking, 160 ksi ftu -
Material
Aluminum -
Material Specification
Ams4928 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Nas4006 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-059-9939 MPN NAS1745-23Conductor Splice
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 1560-01-659-0276 MPN 520-14082-2Aircraft Structural Component Support
- 5305-00-008-5827 MPN NAS1100C08-15Machine Screw
- 5305-00-079-2589 MPN NAS1154-11Close Tolerance Screw
- 5305-00-143-3355 MPN NAS1189C3T6LSocket Head Cap Screw
- 5305-00-144-4164 MPN MS27039DD1-35Machine Screw
- 5305-00-211-9348 MPN NAS514P440-24PMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-522-6834 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6414A53X | National Aerospace Standards |