NSN 5306-01-522-7257
Coaxial Connector
Hexagon head style, 0.188 inches head height, 0.685 inches width between flats, single shear strength: 95 megapascals.
Manufacturer part number 20-057-6-35D for national stock number 5306015227257.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-522-7257.
-
MPN or Model
20-057-6-35D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Head Style
Hexagon -
Head Height
0.188 inches -
Width Between Flats
0.685 inches -
Single Shear Strength
95 megapascals -
End Application
Oh-58d kiowa warrior helicopter -
Thread Diameter
0.374 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
95 newtons per square millimeter -
Part Name Assigned By Controlling Agency
Short thread hex head shear bolt -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-124-8059 MPN 205-030-706-25Bulkhead Stiffener
- 5905-00-283-5850 MPN 204-075-365-3Nonprecision Wire Wound Variable Resistor
- 1560-00-299-0958 MPN 204-071-582-001Arm Rest Assembly
- 1560-00-431-2762 MPN 205-030-237-1Seat Support Insert
- 1560-00-442-1782 MPN 205-032-147-71Aircraft Floor
- 1560-00-489-7601 MPN 212-060-771-001Control Mechanism Mount
- 1560-00-633-0813 MPN 204-001-809-001Bell Crank
- 1560-00-682-5173 MPN 204-040-503-003Gear Box Cap
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-522-7257 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
20-057-6-35D | Bell Helicopter Textron Inc. |