NSN 5306-01-523-8321
Coaxial Connector
Between 2.689 inches and 2.719 inches fastener length, dished hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.552 inches and 0.623 inches .
Manufacturer part number NAS6306-36D for national stock number 5306015238321.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-523-8321.
-
MPN or Model
NAS6306-36D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
0.454 inches -
Fastener Length
Between 2.689 inches and 2.719 inches -
Head Style
Dished hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.552 inches and 0.623 inches -
Grip Diameter
0.374 inches -
End Application
Pre-provisioning support -
Grip Length
Between 2.240 inches and 2.260 inches -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Criticality Code Justification
Mdcl and agav -
Material
Iron alloy 660 -
Material Specification
Nas 6303 national std/spec all material responses -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-408-2699 MPN NAS1387-1Conductor Splice
- 5940-01-361-8073 MPN NAS1746-6Conductor Splice
- 5935-01-650-0947 MPN MS24266R14B12PElectrical Plug Connector
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5305-00-003-8158 MPN NAS1351-5-12PSocket Head Cap Screw
- 5305-00-007-1559 MPN NAS1100C04-16PMachine Screw
- 5305-00-008-9119 MPN NAS1190E04T22LSocket Head Cap Screw
- 5305-00-021-3616 MPN MS35307-305Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-523-8321 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6306-36D | Bell Helicopter Textron Inc. |
NAS6306-36D | National Aerospace Standards |