NSN 5306-01-524-0776
Coaxial Connector
Between 3.220 inches and 3.250 inches fastener length, dished hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6608D40 for national stock number 5306015240776.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-524-0776.
-
MPN or Model
NAS6608D40
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
Between 3.220 inches and 3.250 inches -
Head Style
Dished hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.494 inches and 0.495 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
2.500 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.019 inches first hole -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 federal specification 1st material response and ams6415 assn standard 2nd material response and mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type ii class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-006-8306 MPN NAS1100E06-4PMachine Screw
- 5305-00-057-0492 MPN MS24694-S6Machine Screw
- 5305-00-057-0526 MPN NASM51958Machine Screw
- 5305-00-058-7611 MPN MS24694S131Machine Screw
- 5305-00-066-7325 MPN MS24693-C5Machine Screw
- 5305-00-081-6668 MPN NASM24693-S2Machine Screw
- 5305-00-139-6757 MPN MS51861-34CTapping Screw
- 5305-00-206-8416 MPN NAS338A21-5Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-524-0776 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6608D40 | National Aerospace Standards |