NSN 5306-01-524-0784
Coaxial Connector
0.923 inches fastener length, dished hexagon head style, 0.250 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6708H3 for national stock number 5306015240784.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-524-0784.
-
MPN or Model
NAS6708H3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
0.923 inches -
Head Style
Dished hexagon -
Head Height
0.250 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Hole Diameter
Between 0.070 inches and 0.080 inches -
Grip Diameter
0.499 inches -
Thread Diameter
0.500 inches -
Grip Length
0.625 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Hexagon corners -
Material
Stainless steel -
Material Specification
Ast-5731 assn standard 1st material response or astm 5732 assn standard 2nd material response or astm 5737 assn standard 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-646-1396 MPN JSFB15E4-3Close Tolerance Screw
- 5935-00-160-2471 MPN NAS1666-16Electrical Connector Cable Clamp
- 5940-01-303-7067 MPN NAS1747-11Conductor Splice
- 1680-01-532-3063 MPN NAS77A6-023NAirc Sleeve Bushing
- 1560-01-572-8706 MPN L3003943-031Aircraft Access Door
- 5940-01-408-4280 MPN NAS1063A2-TB107CETerminal Board Marker Strip
- 5305-00-040-9560 MPN NAS1081-0202Setscrew
- 5305-00-051-2336 MPN NASM51958Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-524-0784 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6708H3 | Pilgrim Screw Corporation |
NAS6708H3 | National Aerospace Standards |
Stock Check
![](/public/images/partscage_shelf3.png)