NSN 5306-01-524-0799
Coaxial Connector
Between 1.491 inches and 1.521 inches fastener length, dished hexagon head style, between 0.219 inches and 0.234 inches head height, width between flats: between 0.678 inches and 0.690 inches .
Manufacturer part number NAS6707DU13 for national stock number 5306015240799.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-524-0799.
-
MPN or Model
NAS6707DU13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.694 inches -
Fastener Length
Between 1.491 inches and 1.521 inches -
Head Style
Dished hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.678 inches and 0.690 inches -
Grip Diameter
0.437 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.437 inches -
Grip Length
0.812 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.305 inches first hole -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard all material responses -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-348-4727 MPN NAS1063C7-1Terminal Board
- 5940-01-413-3008 MPN NAS1063B199-218Terminal Board Marker Strip
- 5305-00-007-2943 MPN NAS1100E06-9PMachine Screw
- 5305-00-008-5897 MPN NAS1102C5-14Machine Screw
- 5305-00-059-9564 MPN NAS1221-4-12Machine Screw
- 5305-00-088-9624 MPN NAS1352-6LN8PSocket Head Cap Screw
- 5305-00-089-7664 MPN MS51021-73Setscrew
- 5305-00-107-9308 MPN NAS1633E28Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-524-0799 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6707DU13 | National Aerospace Standards |