NSN 5306-01-524-9653
Coaxial Connector
Between 2.3675 inches and 2.3975 inches fastener length, spline drive shear head head style, 0.210 inches head height, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number AIC596L6-29 for national stock number 5306015249653.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-524-9653.
-
MPN or Model
AIC596L6-29
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.570 inches -
Fastener Length
Between 2.3675 inches and 2.3975 inches -
Head Style
Spline drive shear head -
Head Height
0.210 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Single Shear Strength
132000 pounds per square inch -
Head Minor Diameter
0.679 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.8025 inches and 1.8225 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
17100 pounds per square inch -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-242-4814 MPN AIC812-04-11Machine Screw
- 5305-00-786-7559 MPN 51B334-2Machine Screw
- 5305-00-840-5962 MPN 965336-1Externally Relieved Body Screw
- 5305-01-021-3759 MPN BACB30LU4-3Close Tolerance Screw
- 5305-01-054-4628 MPN BACB30LU2-2Close Tolerance Screw
- 5305-01-056-1510 MPN BACB30LU4-20Close Tolerance Screw
- 5305-01-184-3777 MPN BACB30LU8-21YShoulder Screw
- 5305-01-235-3591 MPN 9132M23P43Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-524-9653 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC596L6-29 | Sps Technologies, Llc |