NSN 5306-01-525-3229
Coaxial Connector
Cotter pin hole not included.
Manufacturer part number NAS464PA15 for national stock number 5306015253229.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-525-3229.
-
MPN or Model
NAS464PA15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.327 inches and 0.374 inches -
Fastener Length
Between 1.265 inches and 1.312 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Single Shear Strength
4650 pounds per square inch -
Thread Diameter
0.250 inches -
Grip Length
0.938 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.110 inches first hole and 1.142 inches first hole -
Material
Steel comp 4140 and steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-113-9420 MPN NAS1387-4Conductor Splice
- 5940-01-137-3216 MPN NAS1389-7Conductor Splice
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5305-00-007-1550 MPN NAS1131C96PClose Tolerance Screw
- 5305-00-021-3740 MPN MS35307-364Hexagon Head Cap Screw
- 5305-00-052-7407 MPN MS24627-14Tapping Screw
- 5305-00-059-3667 MPN MS51958-71Machine Screw
- 5305-00-066-7322 MPN NASM24694-C52Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-525-3229 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464PA15 | National Aerospace Standards |