NSN 5306-01-525-5487
Close Tolerance Hex Head Bolt
Between 2.972 inches and 3.002 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.429 inches and 0.439 inches .
Manufacturer part number NAS6604-41 for national stock number 5306015255487.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-525-5487.
-
MPN or Model
NAS6604-41
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 2.972 inches and 3.002 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
Between 0.2445 inches and 0.2450 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 2.552 inches and 2.572 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Ams6349 assn standard 1st material response or ams6382 assn standard 2nd material response or ams6322 assn standard 3rd material response or ams6415 assn standard 4th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6608 professional/industrial association standard
More from these suppliers
- 5975-00-709-9429 MPN NAS622CT3Electrical Clamp Hook
- 5930-01-400-4025 MPN 2269-006Pressure Switch
- 5940-01-413-3005 MPN NAS1063B1-7Terminal Board Marker Strip
- 5940-01-425-6517 MPN NAS1063A15-329Terminal Board Marker Strip
- 5935-01-597-0337 MPN E0762F15-04LSpec Backshell
- 5935-01-218-6323 MPN NAS1100C08-8Screw
- 5305-00-007-1550 MPN NAS1131E96PClose Tolerance Screw
- 5305-00-007-6178 MPN NAS1100E02-13Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-525-5487 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6604-41 | National Aerospace Standards |